MCC Video Library

Product Videos

Join the Measurement Computing YouTube Channel to stay up-to-date on future videos.
Data Translation videos are available to view on this YouTube Channel.
Click Image to View
E-TC
Ethernet-Based 8-Channel Thermocouple Input Device (2:31 minutes)
The New E-TC offers high-accuracy temperature measurement with an Ethernet interface. The device offers the best value per channel and the best possible accuracy because the accuracy of the internal measurement electronics exceeds the accuracy specifications of the thermocouple sensors.

 

DAQami Software
DAQami Version 3.0: Data Acquisition Companion Software for Acquiring Data and Generating Signals (2:18 minutes)
New features in DAQami version 3.0 allow users to add the following functions to their DAQami application; set wave type, frequency, and duty cycle of analog outputs, control digital outputs on a per channels basis, and set frequency and duty cycle of counter/timer outputs.

 

TC-32
Acquiring, Viewing, and Logging Temperature Data with the TC-32 and TC-32-EXP (3:38 minutes)
This video introduces you to the TC-32 which offers 32 thermocouple inputs with 24-bit resolution, and easy-to-connect mini-jack thermocouple connectors – expandable to 64 thermocouple channels with the TC-32-EXP.

 

DASYLab
Installing DASYLab with the Measurement Computing Driver (2:56 minutes)
This video will have you up and running DASYLab in three easy steps.

 

SC-1608 Series
SC-1608 Series USB and Ethernet DAQ with Signal Conditioning Introduction (4:40 minutes)
Learn more about the SC-1608 Series of USB and Ethernet DAQ devices with integrated analog and digital signal conditioning.

 

SC-1608 Series
Learn How to Assemble a Measurement Computing SC-1608 Series Product (3:22 minutes)
The SC-1608 Series provides an all-in-one solution to measure and condition analog signals (voltage, temperature, current, frequency, strain, and so on), as well as high voltage and relay digital signals.

 

E-1608 and DAQami
Acquiring Data over Ethernet with an E-1608 and DAQami (6:17 minutes)
The E-1608 offers four differential or eight single-ended analog inputs, sample rates up to 250 kS/s, two 16-bit analog outputs, eight bit-configurable digital I/O, and a 32-bit event counter input.

 

Taking Humidity Measurements with the USB-201
Using TracerDAQ Data Acquisition Software with USB Hardware (7:06 minutes)
TracerDAQ is a suite of virtual instruments that requires no programming experience. This video demonstrates how to acquire, analyze, display data, and generate signals.

 

TracerDAQ
Taking Humidity Measurements with the USB-201 Data Acquisition Device (5:06 minutes)
This video demonstrates how to use a low-cost humidity sensor with Measurement Computing's USB-201.

 

BTH-1208LS
Bluetooth DAQ for Android: Getting Started with the MCC BTH-1208LS (3:54 minutes)
This video shows how easy it is to acquire data over a Bluetooth™ connection using the BTH-1208LS and demo apps downloaded from Google Play™.

 

USB-2404-UI
USB-2404-UI Universal Input DAQ Device (3:18 minutes)
This video shows how the USB-2404-UI can be used to measure a variety of sensor types such as RTDs, thermocouples, load cells, and other powered sensors.

 

BTH-1208LS
Measuring Temperature using the BTH-1208LS DAQ Device (5:09 minutes)
This video shows you how to measure temperature using the MCC BTH-1208LS and an LM35 semiconductor temperature sensing device.

 

USB-2408
Simple Load Cell Measurement with the USB-2408 DAQ Device (5:37 minutes)
This video shows you how to measure weight using the USB-2408 from Measurement Computing and a load cell.

 

USB-5100 Series Software
Exporting Data to Excel® – USB 5104 (1:38 minutes)
The USB-5100 Series Software package offers many tools for analyzing data. However, there are times when you need additional tools to complement your data analysis. This video shows you how to export your data to a Microsoft Excel file.

 

USB-5100 Series Software
Retrieving and Plotting Data – USB 5104 (3:46 minutes)
This video shows in detail how to readout the data, save it to a file, and analyze the data using the USB-5100 Series Software package with the USB-5104 data logger.

 

MCC Devices with MATLAB
Using Measurement Computing Devices with MATLAB® (3:00 minutes)
See how easy it is to create an analog input application using the MATLAB Data Acquisition Toolbox™ and the USB-1608GX-2AO.

 

MCC Devices with MATLAB
Using Measurement Computing Devices with MATLAB® (3:12 minutes)
See how easy it is to create an analog output application using the MATLAB Data Acquisition Toolbox™ and the USB-1608GX-2AO.

 

MCC DAQ device with Android
Using an MCC DAQ device with Android™ and a Mini PC (2:08 minutes)
This video shows you how to download a Universal Library for Android app from Google Play™ onto a mini pc, and acquire data from a Measurement Computing DAQ device.

 

Introduction to the USB-600 Series
Introduction to the USB-600 Series Data Loggers (3:15 minutes)
This video introduces the new battery-powered USB-600 Series temperature, humidity, and thermocouple data loggers. They feature an LCD display, logging rates from 2 seconds to 2 hours, 250,000 reading internal memory, push button controls as well as audible and on screen alarms.

 

Thermocouple Measurements with the USB-5104
How to Log Thermocouple Measurements with the USB-5104 (4:30 minutes)
This video will give you a basic understanding of how to setup a temperature logging session using our USB-5104 4-channel temperature data logger and USB-5100 Series software. The USB-5104 records data from up to 4 thermocouples as well as ambient temperature with an internal thermistor.

 

Universal Library for Android Example App
How to Run a Universal Library for Android™ Example App (2:43 minutes)
This video shows you how to import the UL for Android AInScanPlot example project into an Eclipse workspace, deploy the project to an Android device such as a tablet or phone, and run the app on the Android device.

 

Measure a 4-20mA Current Loop
Measure a 4-20mA Current Loop for Under $100 (4:51 minutes)
This video demonstrates how easy it is to measure a 4-20 mA current loop using MCC's low-cost USB-201 and a 250 Ohm resistor as a current shunt.

 

USB-200 Series
USB-200 Series Introduction (2:43 minutes)
Watch a brief introduction to the USB-201 and USB-204 - two new products from Measurement Computing that offer tremendous value in data acquisition.

 

USB-200 and USB-1208 Series
Comparing USB-201/USB-204 Features with the USB-1208FS-Plus/USB-1208LS (4:02 minutes)
Learn which USB DAQ device is right for your application.

 

How to Measure Thermocouples
FFT Analysis using DASYLab® and the USB-1208FS (9:09 minutes)
Learn how to capture a waveform, compute the frequency domain, and extract the peak frequency and amplitude using DASYLab all without programming.

 

How to Measure Thermocouples
How to Measure Thermocouples with ULx for NI LabVIEW™ (3:18 minutes)
Learn how easy it is to measure thermocouples using ULx for NI LabVIEW with a USB-TC temperature measurement device. NI LabVIEW support is included with most MCC hardware.

 

Custom Temperature Applications
Custom Temperature Applications using DASYLab® (12:33 minutes)
Learn how easy it is to measure and log temperature data using DASYLab and the USB-TEMP. With DASYLab you can create custom displays, alarms, and save data to Excel®.

 

USB-525 Data Logger Assistant
USB-525 Data Logger Assistant (5:17 minutes)
Learn how the USB-525 Data Logger Assistant allows users of compatible USB-500 Series data loggers to configure their units, download data, and view logging results on-the-spot, rather than removing the logger from the environment being measured and taking it back to their PC.

 

Universal Library
Acquiring Analog Input with Universal Library (5:48 minutes)
Learn how easy it is to write a program that acquires analog input voltage data using Universal Library and Visual Basic®.

 

USB-TEMP Device
How to Measure an RTD using a USB-TEMP DAQ Device (2:35 minutes)
Watch this demonstration to see how you can measure an RTD using TracerDAQ software and a USB-TEMP data acquisition (DAQ) device.

 

NI LabVIEW
Using NI LabVIEW with Measurement Computing DAQ (5:08 minutes)
This video shows how to set up an MCC USB DAQ device, configure sample rate, display waveform data, and save to disk. NI LabVIEW support is included free with most MCC hardware.

 

USB-TC Device
How to Measure a Thermocouple using TracerDAQ Software (2:22 minutes)
Watch this demonstration to see how you can measure a thermocouple using TracerDAQ software and a USB-TC data acquisition (DAQ) device.

 

USB-2408 Series
New Multifunction 24-bit Temperature and Voltage Devices (2:30 minutes)
The USB-2408 Series features up to 16 SE/8 DIFF analog inputs. Each device includes 8 digital I/O and two counter inputs. The USB-2408-2AO also features two analog outputs. Each device in the series offers 24-bit resolution for ultra-accurate voltage or thermocouple measurements.

 

USB-1608G Series
New High-Speed USB DAQ Devices (2:39 minutes)
The USB-1608G Series offers sampling rates up to 500 kS/s, 16 analog inputs and up to two analog outputs, plus eight digital I/O, two counter inputs, and one timer output.

 

New Multifunction DAQ Devices
New Multifunction DAQ Devices (3:35 minutes)
Introduction to the new USB-1608G Series of low-cost, high-speed devices with sample rates up to 500 kS/sec and the USB-2408 Series of 24-bit devices for temperature or voltage.

 

LGR-5320 Series
Multifunction Data Acquisition - LGR-5320 Series (4:19 minutes)
The LGR-5320 Series are high-speed, stand-alone data loggers for analog and digital signals.

 

Application Videos

Measurement Computing Corporation provides customers with PC-based data acquisition hardware and software.
The company offers high-quality, reliable products, backed by lifetime warranties and free technical support.
Join the Measurement Computing YouTube Channel to stay up-to-date on future videos.
USB-2416 and DASYLab
Monitoring Engine Performance with Measurement Computing Data Acquisition
Engine performance is only one part of a formula racing car but it's a vital part. Get a glimpse into how Cornell's FSAE racing team uses Measurement Computing's USB-2416 and DASYLab graphical programming language with their engine dyno to help fine tune their engine performance.
Click here to view this video on YouTube.

 

USB-2416-4AO
Designing a Satellite Development Instrument for NASA using the USB-2416-4AO (2:57 minutes)
The USB-2416-4AO high-resolution, multifunction DAQ module was used in a measurement and control application in the design of a satellite development instrument for NASA. The “black body” is a vacuum chamber cooled with liquid nitrogen. It is used to calibrate infrared instruments in the development of satellites that measure global warming from space.
Click Here to View this Video.

 

USB-PDIS08
Designing a Tornado Alert System using the USB-PDISO8 (3:39 minutes)
The USB-PDISO8 digital I/O and relay output module is used to create a tornado alert and signaling system. The USB module reads a manual trigger to start the sequence of a tornado signaling system designed by Federal Signal Corporation. Once this trigger is activated, it sends a signal to the PC and the signaling sequence begins.
Click Here to View this Video.

 

On Demand Tutorials

MCC On Demand Tutorials are archives of recorded Webcasts. Topics are presented by engineers and industry partners who discuss
the principles of signal conditioning, conversion, and acquisition. The information is intended to help you select the most appropriate
test equipment and software for data acquisition and signal analysis for your application.
Join the Measurement Computing YouTube Channel to stay up-to-date on future videos.
Analog to Digital
Analog to Digital Conversion (28 minutes)
ADC Types - Accuracy and Resolution - Noise Histograms - Effective Number of Bits - The ENOB Test - ADC Output Averaging.
Click here to view this .wmv video.

 

Multiplexing
Multiplexing & Sampling Theory (25 minutes)
Detailed discussions of the advantage of multiplexing and fundamental concepts.
Click here to view this .wmv video.

 

Electrical Measurements 1
Electrical Measurements Part 1 (24 minutes)
DC Voltage - AC Voltage - Current.
Click here to view this .wmv video.

 

Electrical Measurements 2
Electrical Measurements Part 2 (19 minutes)
Resistance - Wheatstone Bridges - Single-Ended and Differential Measurements - Kelvin Connections
Click here to view this .wmv video.

 

Signal Conditioning 1
Fundamentals of Signal Conditioning Part 1 (26 minutes)
Amplification - Instrumentation Amplifiers - Filtering.
Click here to view this .wmv video.

 

Signal Conditioning 2
Fundamentals of Signal Conditioning Part 2 (22 minutes)
Attenuation - Isolation - Linearization - Circuit Protection.
Click here to view this .wmv video.